Pool Line pH Controller and Dosing Pump – BL100-Meter and probe
$548.540
+ IVA
Disponible Pronto
Disponible para entrega hasta en 90 días.
Disponible Pronto
Engineered to be an inexpensive solution for homeowner and maintenance companies to maintain the ideal pH at all times of a swimming pool or hot tub. The BL100 Pool Line pH Controller and Dosing Pump is a complete solution with both a process controller and a chemical dosing pump. Simply insert the probe and injection valve in-line with the re-circulation pump and supply the acid to be dosed.
- All in one solution for maintaining the proper pH
- Industrial process probe with 1/2″ NPT threads for insertion into re-circulation line
- Input for level controller or flow switch
CARACTERíSTICAS DEL PRODUCTO
BL100 pH Controller and Dosing Pump is a system engineered for maintaining the pH of swimming pools, hot tubs, and spas. Typically chlorine, whether liquid or solid, is alkaline and will raise the pH of the water that it is added to. As the pH increases above pH 7.4, a form of chlorine known as hypochlorite ion (OCl–) increases. This form of chlorine is 100 time less effective at killing bacteria as compared to the other form of chlorine known as hypochlorous acid (HOCl). For this reason it is important to maintain the correct pH level in order to ensure that the more powerful hypochlorous acid form is available for disinfection. The BL100 was developed to be an inexpensive solution for the consumer to maintain the ideal pH at all times. Simply insert the probe and injection valve in-line with the recirculation pump and provide the chemical to be dosed.
Multi-color LCD
The BL100 features a multi-colored LCD that provides for a quick way to see the status of the pool controller. If in control mode and operating as intended the display will be green. If control is not enabled then the display will be yellow while in an alarm state the display flashes red.
Intuitive LCD
Both pH and temperature are displayed with status icons that show when the pump is dosing and the control mode status.
Programmable Alarm System
Hanna controllers allow users to enable or disable the low and high level alarms for pH. When an alarm is activated, all dosing will stop. For added safety, the alarm system also offers overdosing protection in that if the set point value is not corrected within a programmed time interval then the meter will go into alarm status.
On-Screen Features
Adjustable Flow Rate The flow rate from the dosing pumps is adjustable from 0.5 to 3.5L/h. Larger bodies of water require more chemical to be dosed than smaller ones in per unit of time. The adjustable flow rate, like the proportional band, allows for better control in maintaining a desired set point .
Automatic Proportional Pump Control The peristaltic dosing pump can be controlled by simple on/off or more advanced proportional control which helps prevents overshooting of the set point. When using proportional control the flow rate that is programmed, will be impacted by the proportional band used. The closer the reading is to the set point the longer it takes for the peristaltic pump to complete one revolution. If the reading is outside the proportional band then the amount of time it takes to complete one revolution is based on the flow rate programmed.
Acid Tank Level/Flow Switch InputThe BL100 allows for a connection to an optional level controller or flow switch. This input can be used to disable the dosing pump when there is no chemical left in the reservoir tank or there is no flow due to the pump being turned off.
Built-in Dosing Pump
Peristaltic Dosing Pump
The BL100 features a peristaltic dosing pump that is superior to diaphragm versions due to the ability to self-prime when there is no liquid in the uptake line.
Brushless Motor
The brushless motor does not have nay gears or brushes that can wear out. A brushless design provides for a long life and little maintenance. The compact stepper motor allows for very precision control over the dosing of the chemical.
Long-life Persitaltic Tubing
The industrial grade peristaltic tubing is chemical resistant and provides for a relatively long-life. As tubing stretches over time it can be easily replaced. No special tools required.
pH electrode with flow cell
Three Configuration Options
The BL100 is available in multiple configurations including a meter only, meter and probe, and? a complete package that includes bypass loop? and panel mounted flow through cell. All models include aspiration tubing with filter and dispensing tubing with injection valve.
HI10053 Amplified pH/Temperature Probe
The BL100 uses the HI10053 amplified probe that incorporates both pH and temperature sensors and connects to the controller with a single waterproof Quick Connect DIN connector. The built in amplifier helps to reduce electrical noise from recirculation pumps to provide for a stable, reliable measurement. The pH glass used is ideal for low conductivity water and provides for fast response..
NPT Threads for In-line and Tank Mounting
The ABS body of the probe has a 1/2? threaded fitting for insertion to an in-line ?T? fitting or the flow cell. The back end part of the probe has 3/4? NPT threads for submersion/ tank mounting. The probe body has a hex fitting for tightening snuggly with a wrench. .
| Peso |
1 , 324829 kg |
|---|---|
| Marca |
Pool Line |
| Brand |
PoolLine |
| Especificación | Detalle |
| Código | BL100 |
| Intervalo de pH | 0.00 a 14.00 pH |
| Resolución de pH | 0.01 pH |
| Exactitud de pH (@25°C/77°F) | ±0.10 pH |
| Intervalo de temperatura | -5.0 a 105°C (23.0 a 221.0°F) |
| Resolución de temperatura | 0.1°C (0.1°F) |
| Exactitud de temperatura (@25°C/77°F) | ±0.5°C (±0.9°F) |
| Compensación de temperatura | automática |
| Calibración | Calibración de usuario: automática, uno o dos puntos con solución estándar (4.01, 7.01, 10.01 pH) Calibración del proceso: un punto, ajustable (± 0.50 pH cercano al valor de pH medido) |
| Control de la bomba | flujo seleccionable (0.5 a 3.5 L / hora; 0.13 a 0.92 G / hora)
control manual para cebado de bomba |
| Alarmas | alto y bajo con la opción de habilitar / deshabilitar
se activa después de 5 seg. si el controlador registra un conjunto de lecturas consecutivas por encima / debajo del nivel de valores umbral con la opción habilitar / deshabilitar protección de tiempo extra (1 a 180 min. o apagado) sistema de alarma intuitivo con luz de fondo roja, verde claro y verde |
| Entrada externa | entrada para controlador de nivel o interruptor de flujo para desactivar la bomba dosificadora en caso de que no haya productos químicos cuando se usa un controlador de nivel o no hay flujo cuando se usa un interruptor de flujo - aislado galvánicamente |
| Salida de relevador de alarma | SPDT 2.5A / 230 VCA |
| Fuente de alimentación | 100—240 VAC, 50/60 Hz |
| Consumo de energía | 15 VA |
| Cubierta | Bomba incorporada incorporada en la carcasa, con clasificación IP65 |
| Condiciones ambientales | 0-50°C (32-122°F), max. 95% HR sin condensar |
| Dimensiones | 90 x 142 x 80 mm (3.5 x 5.6 x 1.8”) |
| Peso | 910 g (32 oz.) |
| Información para ordenar | BL100-00 se suministra con una sonda de pH / temperatura HI10053, solución de calibración de pH 4.01, 20 ml (3), solución de calibración de pH 7.01, 20 ml (3), cable de conexión de alimentación, manual de instrucciones y certificados de calidad para instrumento y sonda.
BL100-10 (con kit de montaje en línea) se suministra con controlador BL100, sonda de pH / temperatura HI10053, filtro de aspiración del controlador de la piscina, inyector del controlador de la piscina, rosca de 1/2 ”, soporte para tubería de Ø 50 mm (2), tubo de aspiración de PVC (flexible) (5 m), tubo de inyección de PE (rígido) (5 m), válvulas (2), solución de calibración de pH 4.01, 20 ml (3), solución de calibración de pH 7.01, 20 ml (3), cable de alimentación, manual de instrucciones y certificados de calidad para instrumento y sonda. BL100-20 (con kit de montaje de celda de flujo) se suministra con controlador BL100, sonda de pH / temperatura HI10053, celda de flujo para BL100 / BL101, conjunto de panel de montaje para BL100 / BL101, filtro de aspiración del controlador de piscina, inyector del controlador de piscina, rosca de 1/2”,soporte para tubo de Ø 50 mm (3), tubo de PVC de aspiración (flexible) (5 m), tubo de inyección de PE de dosificación (rígido) (15 m), adaptador de tubo 1/2” - 6 mm (2) , válvulas (2), solución de calibración de pH 4.01, 20 ml (3), solución de calibración de pH 7.01, 20 ml (3), cable de alimentación, manual de instrucciones y certificados de calidad para instrumento y sonda. |
| Sonda recomendada | Sonda de pH / temperatura digital HI10053 con conector DIN rápido, aislado galvánicamente |
Mantenciòn
Despacho
Consultas
Valoraciones
Borrar filtrosNo hay valoraciones aún.