SKU: BL 983320-0

Conductivity (EC) Controller (0.0 – 199.9 S/cm) – BL983320-0 -12VDC

$310.740

+ IVA

Disponible Pronto

Disponible para entrega hasta en 90 días.

Disponible Pronto

The BL983320 is a compact, panel mounted, process controller for measuring electrolytic conductivity (EC) of a process stream that is within the 0.0 to 199.9 ?S/cm range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid that switches from one DI (deionized) tank to another or to open a valve that will allow lower EC water to flow into a tank being monitored in order to lower its EC. The BL983320 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.

Multicolor LED Indicator

LED changes color based on status.

Fire Retardant Casing

For additional safety the controllers outer case is made of fire resistant plastic.

Splash Resistant Cover

A clear plastic cover protects the face panel from dirt and liquids.

CARACTERíSTICAS DEL PRODUCTO

BL983320

Adjustable Dry Contact Dosing Relay

The BL983320 features a dosing relay that is activated when the reading is above a user programmable set point.

Programmable Overdose Protection

For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.

Relay Control Override

With the flick of a switch the mini controller’s relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.

Multicolor LED Indicator

Multicolor LED indicator allows an operator to quickly check the status of the controller.

  • Green = Meter in measurement mode and reading is below the set point.
  • Orange/Yellow = Reading is above the set point and the relay is activated.
  • Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.
BL983320

Fuse Protected Dosing Contacts

The relay dosing contact is rated for up to a 2A load and is fuse protected.

Labeled Termination Connections

Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.

HI7634

1/2″ NPT Male Threaded Amperometric Probe for Mounting In-line*

The BL983320 mini controller uses the HI7634 conductivity probe that is available with different cable lengths.

*HI7634 is not included and must be ordered separately

Peso 0,555 kg
Brand BeerLine
0 comentarios
0
0
0
0
0

Valoraciones

Borrar filtros

No hay valoraciones aún.

Sé el primero en valorar “Conductivity (EC) Controller (0.0 – 199.9 S/cm) – BL983320-0 -12VDC”

Tu dirección de correo electrónico no será publicada. Los campos requeridos están marcados *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5

Código de producto HI1048B
Descripción Electrodo de pH con CPS™ (Sistema de prevención de incrustaciones)
Referencia doble, Ag/AgCl
Unión / Tasa de flujo CPSTM
Electrolito KCl 3.5M
Presión máxima 0.1 bar
Intervalo pH: 0 a 12
Temperatura de operación recomendada -5 a 60°C (23 a 140°F) - BT
Punta / Forma esférica (dia: 8 mm)
Sensor de temperatura Solo en modelo DIN
Amplificador Solo en modelo DIN
Material del cuerpo Vidrio
Cable 7-pin; 1 m (3.3')
Uso recomentado Vino, mosto, jugo
Conexión DIN

 

Descargar Manuales 

SERVICIO TÉCNICO HANNA

En HANNA® INSTRUMENTS contamos con un centro de Servicio Técnico autorizado donde usted podrá contar con la asesoría de Ingenieros capacitados que le brindarán los servicios de mantenimiento, reparación y validación de nuestros equipos.