Portable Dissolved Oxygen meter - HI8043

$345.990
Entrega hasta 30 días
The HI8043 is a versatile dissolved oxygen meter ideal for use in Educational laboratories, wastewater treatment, fish-farming and water analysis.
  • Automatic Temperature Compensation (ATC)
  • Manual, Two-point Calibration
  • Low Battery Indicator                        

HI 8043 is a portable meter for Dissolved Oxygen measurements. It is housed in a lightweight case, with an easy-to-read LCD. Dissolved oxygen and temperature measurements can be performed in the field (wastewater treatment, fish-farming, water analysis, etc.) as well as in the laboratory without compromising accuracy. Dissolved oxygen is indicated in mg/L (ppm) and the reading is compensated for the temperature effect (ATC).

The dissolved oxygen probe is provided with a membrane for covering the polarographic sensors, and features a built-in thermistor for temperature measurements and compensation.

This meter can operate continuously for approximately 100 hours on one 9V battery. The HI8043's low battery warning helps reduce the possibility of taking an erroneous reading due to low power. The easy dial on this meter is it's greatest asset. Select the O₂ mode and the polarographic probe will supply you with accurate dissolved oxygen measurements in mg/L. Switch the dial to °C to display the temperature readings. The standby mode (stb) is particularly useful to keep the current flowing through the probe which is continuously polarized and ready for use.

Más Información
Rango Oxígeno Disuelto 0.00 to 19.90 mg/L (ppm)
Resolución Oxígeno Disuelto 0.01 mg/L (ppm)
Exactitud Oxígeno Disuelto ±1.5% F.S.
Calibración Oxígeno Disuelto manual, two points (zero and slope)
Compensación de Temperatura Oxígeno Disuelto automatic, 0 to 30°C
Sonda OD HI76401 polarographic DO probe with internal temperature sensor, DIN connector and 3 m (10’) cable
Tipo de Batería/Duración 9V / approximately 100 hours of continuous use
Ambiente 0 to 50°C (32 to 122°F); RH max 95%
Dimensiones 180 x 83 x 40 mm (7.1 x 3.3 x 1.6”)
Peso 240 g (8.4 oz.)
Información Sobre Pedidos HI8043 is supplied with HI76401 DO probe, membrane caps (2), O-rings (2), protective cap, electrolyte solution (30 mL), screwdriver for calibration, battery and instruction manual.
Write Your Own Review
Estás evaluando:Portable Dissolved Oxygen meter - HI8043
Tu clasificación
Copyright © 1996-2020 Hanna Instruments, Inc.